Installing laboratory refrigerators and freezers

Laboratory refrigerators and laboratory freezers are quite expensive and you need to make a big investment to procure them. People who use lab refrigerators or lab freezers need to be familiar with how they must put them in operation, and make sure that they are operated in accordance with the manufacturers’ instructions. They should also have a basic idea about the maintenance procedures.

Installation

There are instructions in the manual which come with lab freezers which will guide you to unbox and set the freezer up. You must position your equipment in a way that there is enough circulation for air towards the top and the sides. You must also ensure that the freezer is elevated at least four inches from the ground. Provide a strong and reliable power supply.

·         You must note that the lab freezers and refrigerators should be directly wired with the lab’s central electrical grid. You should do this with the help of professional electricians.

·         You should be familiar with your auto defrosting cycle in your lab freezer and how you can manually defrost it without having any impact on the contents.

General Maintenance Methods

It is essential that you keep the freezer units clean. You should clean the freezer parts on a regular or frequent basis. You can use warm water with baking soda for cleaning the interior surfaces and to remove bad odor from the spilled contents. You can clean the exteriors with any commercial glass cleaner.

Trouble-Shooting Lab Freezers

In general lab freezers have a two year warranty on the various parts and a five year warranty on the compressors. There may be occasions where the different units will not function properly and you must consult the manual in these cases. Some of the malfunctions which can happen are as follows:

·         The compressor is not starting: The power supply is disconnected or damaged.

·         The compressor is working continually: The refrigerant may need replacing, the evaporator has iced or is stuck.

·         The compressor has short cycles: You should check the overload protectors, increase the spread between the different temperature settings, check if the refrigerant is undercharged and the air in your system is not circulating properly.

·         The laboratory refrigerator freezer space is too warm: Settings are too high, the refrigerant may be overcharged, there may be a dirty condenser, the evaporator coils have iced, and the air flow to the condenser and evaporator is blocked.

·         The standard temperature is freezing the product: Control settings are too low or the control points are stuck.

·         Any form of noise: Noise can come because of various reasons like the fan blade is striking one the shroud, the tubes are rattling, the fan blade is vibrating, the condenser motor is rattling, vibrations in general and fan motors getting worn out.

It is important that you provide proper care to all your lab equipment and maintain them appropriately. Lab freezers and refrigerators will provide you with years of uninterrupted services when they are well maintained. In case, you face any issues, or your freezers need repair work then you must contact the professionals to come and resolve the issue.

How can Reducing the Risk of Liability in the science lab equipment

In a reach laboratory there are several regular advanced applications performed with expensive samples. These experiments help to create new drugs, medicines, cures and so on which are useful in analysis, chemistry, haematology, microbiology, genetics, urinalys, immunology and so on. It is important that you have the best quality science lab equipment so that you can have these experiments performed correctly. You should always choose god lab equipment suppliers who will offer you quality products which will meet the requirements of different labs and reduce the risks of liability.

You should, therefore, choose a lab supplier who will offer you:

A good supplier who has vast experience will offer you with the best equipment at inexpensive rates. Hence, you must try to find a lab equipment store which has an inventory with top quality products from reputed manufacturers.

Branded products – 

A good supplier will offer you equipment from various leading brands in your industry. You will get quality equipment which will incorporate innovative features that can ensure precise results in a short period of time. Reputable lab equipment stores will update their inventory on a regular basis by adding the newest products.

Easy to purchase – 

The online stores which sell laboratory devices will offer you ease in purchasing. You would be able to view various different models and equipment, this will include their specifications, prices, and you can choose those products which will serve your best.

Massive inventory – 

A reputed dealer will have a massive inventory with different types of laboratory equipment reagent, and controls. Thereby, they will save you plenty of time and also money because you will be able to purchase the things that you need from a single place.

Competitive price – 

Perhaps the best advantage that you will have in partnering with a good lab equipment supplier is that you will be getting top quality lab devices at really inexpensive prices. A lot of products will be offered at prices which are considerably less than the regular market prices.

Efficient customer service and full technical support - 

A good dealer will always offer you with proper customer care service after making the sale. This is important as it will ensure an efficient and an uninterrupted lab operation. Your dealer will have all professionally trained technicians who would handle the maintenance and repair work and can ensure that the devices are in good condition.

On-time deliveries – 

An equipment supplier who is reliable will have all the right shipping arrangements made so that he can ensure that he can send you your purchased products safely and within the time that was specified.

In the event that you have some restrictions in your budget, then you must find a lab supplier who will offer you with authentic second-hand lab equipment. You will also be able to get recertified equipment which is properly refurbished to meet the original standards. These equipment cost a lot less and will offer you an extended warranty along with full customer service and maintenance.

Key Considerations when Buying a laboratory refrigerators and freezers

In the event that you wish to buy laboratory equipment, then it is crucial that you do a lot of research on the products which you want to get first. Laboratory equipment are expensive and sensitive items, they are generally used in industries, medical labs, research and development centres and pharmacies. So, before you invest you should do get a thorough idea about the qualities you need to look for in your equipment. This is more so for lab freezers or refrigerators. Laboratory Refrigerators are used to store and preserve important samples and products, and if they get contaminated then the whole scientific experiment will be ruined. In this article, you will learn about some of the essential considerations you should make before buying a lab freezer. 

Go For Branded Products

It is important that you should buy from reputed, well established brands when you want lab freezers. The reason for this is that the products would be of good quality, you will get a set guarantee, you will be able to avail of customer care facilities and you may get servicing and repair works easily done too. Hence, it is always recommended that you buy from reputed brands.

What are the Qualities of a Good Lab Freezer?

Because of the fact that a lab fridge is used for medical testing, research and development and pharmaceutical industries, hence they require more refrigeration than what is needed in ordinary households. As a result of this, these lab freezers are more heavy-duty. They can maintain sub-zero temperatures for extended periods of time and can preserve crucial samples for months on end. Some of the features you should look for when buying a lab freeze are as follows:

·      ·          Is there a proper LED display indicating all important information like temperature set up, pressure build ups and so on.

·         If there is an integrated automated alarm system which has both visual and also audio notification settings

·         If the freezer is capable of alarming contacts in case of any emergency and if you have access ports to facilitate auxiliary monitoring.

·         A standard door locking system. Security is essential as it will help protect any important item stored inside the freezer from all unauthorised access.

·         There has to be a system for forced air circulation which can offer you better temperature control along with more uniform temperature.

·         In addition to these, you should check the energy ratings of your system and how energy efficient it is.

·         Lastly, you should check the volume capacity inside the freezer. You need to keep in mind that you will be storing several important items like blood samples, chemicals, vaccines, and so on inside the freezer. So there should be enough space for all of these items.

You can find a number of reputed brands which make lab freezers on the internet. Or you can visit your local supplier and check out what he has there. Online suppliers will offer you better deals and cheaper wholesale prices.

Installing laboratory ice maker machine

The ice machine is one of the most important equipment in a laboratory. It is used primarily for preserving important samples and controlling temperatures during experiments. Laboratory ice maker machines should be installed by professionals otherwise a faulty installation procedure can cause the machine to malfunction. In this small article, you will learn about how the ice machines need to be installed in order to work properly.

How Does the Ice Machine Work?

The ice machine functions in the following ways:

·         Cold water is stored inside the tank which has a pump that helps in circulation through evaporator plates and grid points.

·         Once the run through the compressor suction is done then the liquefaction process will be done.

·         Again the temperature is lowered to under minus ten degrees when the evaporated chilled water condenses on the evaporation plates and turns into ice gradually. The condensed ice will be of a specific thickness.

·         The procedure of defrosting is also available which can help with the de-icing. Thus, the process can be repeated again and again.

Ice Making Repetitions:

Water will automatically start to enter the storage tanks through the additional water valves. After that it, it will go into the flow control valves from where it goes into the pump heads and finally, the shunt. Inside the shunt, the water gets sprayed on the special ice surfaces where water gets cooled to its freezing point. The frozen water will not evaporate but will go into tank through the porous walls and thus the process continues to repeat itself again.

Ice Defrost Cycle:

After the ice reaches a certain predetermined thickness then hot gas will be discharged from a compressor. The gas is directed to the ice maker with a low temperature refrigerant for liquids. Lubrication processes help the gas to facilitate the evaporation process on the ice surface which results in gradual defrosting of the ice. The water which is generated through defrosting gets added back to the water reservoir through porous walls. Such a design also prevents the ice maker machine from getting wet when ice is being discharged.

Condensation:

Inside the laboratory ice machine, there will be mechanisms to facilitate the condensation process also. You will have both options: either water-cooled condensation or by evaporative condensers. For evaporative condensation, there is a evaporative plate which is placed inside the ice machine while for water-cooled condensation, the condenser is placed at the bottom or inside the refrigeration system. Evaporative condensation is quite useful for implementation in high air temperatures and it is also more energy efficient. But water-condensation is useful when you need to lower temperatures in the experiment set-up.

Installing the Ice Maker:

·         Go through the manual thoroughly and learn about all the different parts which need to be joined together.

·         Do not plug in the main switch before installation is complete.

It is highly recommended that you hire a professional to come and install your ice maker machine because this is a complicated job. Several suppliers offer free installation also and you should consider taking their help.