Installing laboratory refrigerators and freezers

Laboratory refrigerators and laboratory freezers are quite expensive and you need to make a big investment to procure them. People who use lab refrigerators or lab freezers need to be familiar with how they must put them in operation, and make sure that they are operated in accordance with the manufacturers’ instructions. They should also have a basic idea about the maintenance procedures.

Installation

There are instructions in the manual which come with lab freezers which will guide you to unbox and set the freezer up. You must position your equipment in a way that there is enough circulation for air towards the top and the sides. You must also ensure that the freezer is elevated at least four inches from the ground. Provide a strong and reliable power supply.

·         You must note that the lab freezers and refrigerators should be directly wired with the lab’s central electrical grid. You should do this with the help of professional electricians.

·         You should be familiar with your auto defrosting cycle in your lab freezer and how you can manually defrost it without having any impact on the contents.

General Maintenance Methods

It is essential that you keep the freezer units clean. You should clean the freezer parts on a regular or frequent basis. You can use warm water with baking soda for cleaning the interior surfaces and to remove bad odor from the spilled contents. You can clean the exteriors with any commercial glass cleaner.

Trouble-Shooting Lab Freezers

In general lab freezers have a two year warranty on the various parts and a five year warranty on the compressors. There may be occasions where the different units will not function properly and you must consult the manual in these cases. Some of the malfunctions which can happen are as follows:

·         The compressor is not starting: The power supply is disconnected or damaged.

·         The compressor is working continually: The refrigerant may need replacing, the evaporator has iced or is stuck.

·         The compressor has short cycles: You should check the overload protectors, increase the spread between the different temperature settings, check if the refrigerant is undercharged and the air in your system is not circulating properly.

·         The laboratory refrigerator freezer space is too warm: Settings are too high, the refrigerant may be overcharged, there may be a dirty condenser, the evaporator coils have iced, and the air flow to the condenser and evaporator is blocked.

·         The standard temperature is freezing the product: Control settings are too low or the control points are stuck.

·         Any form of noise: Noise can come because of various reasons like the fan blade is striking one the shroud, the tubes are rattling, the fan blade is vibrating, the condenser motor is rattling, vibrations in general and fan motors getting worn out.

It is important that you provide proper care to all your lab equipment and maintain them appropriately. Lab freezers and refrigerators will provide you with years of uninterrupted services when they are well maintained. In case, you face any issues, or your freezers need repair work then you must contact the professionals to come and resolve the issue.

How can Reducing the Risk of Liability in the science lab equipment

In a reach laboratory there are several regular advanced applications performed with expensive samples. These experiments help to create new drugs, medicines, cures and so on which are useful in analysis, chemistry, haematology, microbiology, genetics, urinalys, immunology and so on. It is important that you have the best quality science lab equipment so that you can have these experiments performed correctly. You should always choose god lab equipment suppliers who will offer you quality products which will meet the requirements of different labs and reduce the risks of liability.

You should, therefore, choose a lab supplier who will offer you:

A good supplier who has vast experience will offer you with the best equipment at inexpensive rates. Hence, you must try to find a lab equipment store which has an inventory with top quality products from reputed manufacturers.

Branded products – 

A good supplier will offer you equipment from various leading brands in your industry. You will get quality equipment which will incorporate innovative features that can ensure precise results in a short period of time. Reputable lab equipment stores will update their inventory on a regular basis by adding the newest products.

Easy to purchase – 

The online stores which sell laboratory devices will offer you ease in purchasing. You would be able to view various different models and equipment, this will include their specifications, prices, and you can choose those products which will serve your best.

Massive inventory – 

A reputed dealer will have a massive inventory with different types of laboratory equipment reagent, and controls. Thereby, they will save you plenty of time and also money because you will be able to purchase the things that you need from a single place.

Competitive price – 

Perhaps the best advantage that you will have in partnering with a good lab equipment supplier is that you will be getting top quality lab devices at really inexpensive prices. A lot of products will be offered at prices which are considerably less than the regular market prices.

Efficient customer service and full technical support - 

A good dealer will always offer you with proper customer care service after making the sale. This is important as it will ensure an efficient and an uninterrupted lab operation. Your dealer will have all professionally trained technicians who would handle the maintenance and repair work and can ensure that the devices are in good condition.

On-time deliveries – 

An equipment supplier who is reliable will have all the right shipping arrangements made so that he can ensure that he can send you your purchased products safely and within the time that was specified.

In the event that you have some restrictions in your budget, then you must find a lab supplier who will offer you with authentic second-hand lab equipment. You will also be able to get recertified equipment which is properly refurbished to meet the original standards. These equipment cost a lot less and will offer you an extended warranty along with full customer service and maintenance.

Key Considerations when Buying a laboratory refrigerators and freezers

In the event that you wish to buy laboratory equipment, then it is crucial that you do a lot of research on the products which you want to get first. Laboratory equipment are expensive and sensitive items, they are generally used in industries, medical labs, research and development centres and pharmacies. So, before you invest you should do get a thorough idea about the qualities you need to look for in your equipment. This is more so for lab freezers or refrigerators. Laboratory Refrigerators are used to store and preserve important samples and products, and if they get contaminated then the whole scientific experiment will be ruined. In this article, you will learn about some of the essential considerations you should make before buying a lab freezer. 

Go For Branded Products

It is important that you should buy from reputed, well established brands when you want lab freezers. The reason for this is that the products would be of good quality, you will get a set guarantee, you will be able to avail of customer care facilities and you may get servicing and repair works easily done too. Hence, it is always recommended that you buy from reputed brands.

What are the Qualities of a Good Lab Freezer?

Because of the fact that a lab fridge is used for medical testing, research and development and pharmaceutical industries, hence they require more refrigeration than what is needed in ordinary households. As a result of this, these lab freezers are more heavy-duty. They can maintain sub-zero temperatures for extended periods of time and can preserve crucial samples for months on end. Some of the features you should look for when buying a lab freeze are as follows:

·      ·          Is there a proper LED display indicating all important information like temperature set up, pressure build ups and so on.

·         If there is an integrated automated alarm system which has both visual and also audio notification settings

·         If the freezer is capable of alarming contacts in case of any emergency and if you have access ports to facilitate auxiliary monitoring.

·         A standard door locking system. Security is essential as it will help protect any important item stored inside the freezer from all unauthorised access.

·         There has to be a system for forced air circulation which can offer you better temperature control along with more uniform temperature.

·         In addition to these, you should check the energy ratings of your system and how energy efficient it is.

·         Lastly, you should check the volume capacity inside the freezer. You need to keep in mind that you will be storing several important items like blood samples, chemicals, vaccines, and so on inside the freezer. So there should be enough space for all of these items.

You can find a number of reputed brands which make lab freezers on the internet. Or you can visit your local supplier and check out what he has there. Online suppliers will offer you better deals and cheaper wholesale prices.

Installing laboratory ice maker machine

The ice machine is one of the most important equipment in a laboratory. It is used primarily for preserving important samples and controlling temperatures during experiments. Laboratory ice maker machines should be installed by professionals otherwise a faulty installation procedure can cause the machine to malfunction. In this small article, you will learn about how the ice machines need to be installed in order to work properly.

How Does the Ice Machine Work?

The ice machine functions in the following ways:

·         Cold water is stored inside the tank which has a pump that helps in circulation through evaporator plates and grid points.

·         Once the run through the compressor suction is done then the liquefaction process will be done.

·         Again the temperature is lowered to under minus ten degrees when the evaporated chilled water condenses on the evaporation plates and turns into ice gradually. The condensed ice will be of a specific thickness.

·         The procedure of defrosting is also available which can help with the de-icing. Thus, the process can be repeated again and again.

Ice Making Repetitions:

Water will automatically start to enter the storage tanks through the additional water valves. After that it, it will go into the flow control valves from where it goes into the pump heads and finally, the shunt. Inside the shunt, the water gets sprayed on the special ice surfaces where water gets cooled to its freezing point. The frozen water will not evaporate but will go into tank through the porous walls and thus the process continues to repeat itself again.

Ice Defrost Cycle:

After the ice reaches a certain predetermined thickness then hot gas will be discharged from a compressor. The gas is directed to the ice maker with a low temperature refrigerant for liquids. Lubrication processes help the gas to facilitate the evaporation process on the ice surface which results in gradual defrosting of the ice. The water which is generated through defrosting gets added back to the water reservoir through porous walls. Such a design also prevents the ice maker machine from getting wet when ice is being discharged.

Condensation:

Inside the laboratory ice machine, there will be mechanisms to facilitate the condensation process also. You will have both options: either water-cooled condensation or by evaporative condensers. For evaporative condensation, there is a evaporative plate which is placed inside the ice machine while for water-cooled condensation, the condenser is placed at the bottom or inside the refrigeration system. Evaporative condensation is quite useful for implementation in high air temperatures and it is also more energy efficient. But water-condensation is useful when you need to lower temperatures in the experiment set-up.

Installing the Ice Maker:

·         Go through the manual thoroughly and learn about all the different parts which need to be joined together.

·         Do not plug in the main switch before installation is complete.

It is highly recommended that you hire a professional to come and install your ice maker machine because this is a complicated job. Several suppliers offer free installation also and you should consider taking their help.

What the main function of Cleanroom Furniture

Cleanroom furniture or simply known as the cleanroom is a laboratory facility normally used as a part of scientific research or specialised industrial production including the production of microprocessors or pharmaceutical items. They are designed to keep up the extremely low level of particulates like vaporised particles, airborne organisms or dust. They characteristically have a cleanliness level ascertained by the number of particles per cubic meter at a preset molecule measure. The milieu outdoor air in a mainstream urban area holds 35,000,000 particles for each cubic meter and 0.5 μm in size.

AN OUTLINE

Cleanrooms can be very big. Entire production facilities can be restricted within a cleanroom with a factory floor covering thousands of square meters. They are utilized majorly in semiconductor manufacturing, OLED, LCD and LED manufacturing, rechargeable battery, solar panel, the life sciences, biotechnology and other various fields that are extremely vulnerable to environmental contamination. There are also adjustable cleanrooms.

The air that enters the cleanroom from outside is pass through a filter to eliminate dust, and the air inside is continuously spread through HEPA or High-efficiency particulate air filters to remove contaminants that are generated internally.

Staffs make their way in and leave via airlocks at times including an air shower stage and put on protective clothing such as coveralls, boots, gloves, face masks and hoods. The equipment inside the cleanroom is designed to make minimal air blemish. Only special buckets and mops are used. The cleanroom furniture is planned to give off a minimum of particles and is very easy to clean.

Common materials like pencils, paper and fabric made out of natural fibres are often eliminated and some alternatives are used. Cleanrooms are not disinfected only airborne particles are inhibited. Particle levels are generally tested using a particle counter and microorganisms are detected and counted via environmental monitoring procedures. Polymer tools that are used in cleanrooms and need to be determined very carefully to make sure they are chemically compatible with the processing fluids of the cleanroom also ensure to keep a low level of particle generation.

Few cleanrooms are maintained at a positive pressure, in case any leaks occur, the air leaks out of the chamber as an alternative to the unfiltered air coming in. There are few other cleanrooms with HVAC systems that control the humidity to such a low level that extra tool like air ionizers are needed to prevent the problem of electrostatic discharge.

WHAT IS THE PURPOSE OF CLEANROOM FURNITURE?

Every Cleanroom Equipment intends to maintain an environment by ceiling the presence of sub-micron particles and adjusting insufficient environmental conditions. The intensity to which the environment is managed is what parts one cleanroom from another. For example, a cleanroom for class 10 has 10 particles of size 0.5 microns per cubic foot of air, but in case of a class of 100,000 the cleanroom will have 100,000 particles in size of 0.5 microns per cubic foot of air.

WHY DO WE NEED CLEANROOM?

The medical, aerospace, pharmaceutical, semiconductor, high-tech, electronics and many other industries depend on the technology of cleanrooms. As products like the circuit boards of the cell phone become smaller, the probability of blot in production grows higher. In the case of pharmaceutical companies, contaminant-free, clean and safe products are very important to producing and distributing the feasible product.

TUBULAR STEEL WORK TABLE

A tubular steel work table is a strong table on which labour-intensive work can be done. They come in different shapes, sizes and designs. You can get a plain flat surface or an extremely intricate design that can be taken into account as a tool in itself.

 Design of these work tables varies depending on the type of work that will be done on them but these common attributes are similar in all of them. They come in different sizes ranging from a tiny jeweler’s bench to a huge bench that can be used by the ones who makes a staircase. In general, all the workbenches are rectangular, the surface, edges and corners of which often are used as flat or square and dimension paradigm.

WHY TUBULAR STEEL WORK TABLE IS IMPORTANT IN LABORATORY?

1. These tubular steel workbenches are mainly used in an industrial setting as the steel tabletop holds up even under the most drastic conditions. You can choose to do quite a lot of work on these tabletops or you can go ahead moving around the table knowing often that it will still hold up. You can do welding on top of these tabletops, or finish a few projects that require materials weighing near about a hundred pounds.

 If you are not using tables made of stainless steel there are chances that it will break under pressure which will call for a replacement which might cost you additional time and money.

2. The commercial stainless steel work table comes with quite a bit of storage space beneath them that is very easy to access. You can use up this storage space for keeping your tools which will come in handy as you won’t have to look for them everywhere while you are working.

 Every worker might utilise the storage baskets to keep their private items and even the materials that they need for the project they are working on.

3. These tables are a major investment for your Laboratory Worktables. You need something that will stick for a long period. This kind of longevity can only be guaranteed from a material like tubular steel. So you might want to purchase a commercial tubular steelwork table that will last as long as you need. 

Do your research before investing because you need something of high value and utility.

4. These work tables allow you to adjust their heights to tweak it to the level that suits you well. Every table you make use of may well be set to a new height, so you may ask your members of your staff where they need their tables to be set up. They will arrange their setting based on their work habit and suiting their comfort level.

 Thus, purchasing these industrial stainless steel work tables that can be adjusted ensures that every area of the factory or laboratory is working smoothly with no such discomfort among your workforce. The right height of these work tables are very important otherwise it hampers the fluidity of the workflow and acts as a barrier.

Why laboratory ice maker is important

An Ice maker or machine is a useful tool in every laboratory. There are several types of experiments and reactions which require an ice bath in their procedures. Laboratory ice maker is the answer for such requirements. They provide a convenient way to ensure the availability of ice, whenever it is needed.

 

Some of the important points are as follows:

•         Ice makers can easily produce ice from water and dry ice using liquid nitrogen.

•         When it comes to the storage of samples and reagents at a cold place during experiments or other lab activities, the laboratory ice machine are used by the laboratories to do so.

•         Ice makers are usually large shaped floor model units that are connected directly to the water source. However, smaller capacity bench-top models and under-counter are also available.

•         They may also contain replaceable air and water cartridges and may also have antimicrobial features that help in maintaining water and ice quality.

•         A laboratory ice maker can find its application in microbiology labs and for PCR.

•         Ice maker vary in size, based on the amount of ice they can produce and store. They may also vary based on the type or shape of ice produced, including cubes, flakes and nuggets/pearl-shaped.

•         Some of them are able to dispense water and ice, while others have large covered bins from which it is necessary to scoop or can transfer the ice into a secondary container.

•         Ice making can be done continuously until a threshold point is reached, whereas other ice makers can be programmed in a way that it meets the fluctuating demand.

•         Like refrigerators and freezers, almost every ice maker runs on a regular current.

•         They can be placed in smaller or enclosed areas, as they usually vent toward the front and not towards the back.

•         At a time, dry ice maker can produce small quantities of dry ice which usually amounts to 454g block. And it takes less than five minutes to form a block.

•         For production, it requires a liquid carbon dioxide tank along-with a dip tube. To produce around 8 to16 blocks of dry ice, a 50-pound tank of liquid carbon dioxide is required.

•         There are versions of ice makers that can produce dry ice as flakes are also available.

There are certain laboratory ice makers that only make ice, but then this produced ice needs to be stored in a separate ice bin, so it is preferred to have ice makers that can do both tasks i.e., make and store the ice. It should be decided, if flaked or cubed ice is preferred, and if somehow cubes are wanted, then what shape and size is required, are a few important points to determine before purchasing a laboratory ice maker. How much ice can be produced and/or stored and the size of the ice maker should also be considered before the purchase is done. So, if you are looking for the best ice makers for your laboratory then you can get the best from global lab supply too.