Top 6 Ways how to Maintain Laboratory Shel Lab Incubators

The incubator is primarily an equipment which is used for creating a controlled working environment inside the lab where you will be able to regulate and control temperature, ventilation and internal humidity. The incubators are necessary to several experiments where you need to cultivate various types of microorganisms, biological samples and so on. They are also required for hatching eggs, taking care of infants and so on. In this article, you will learn about some effective ways to maintain your lab incubator.

Materials in a lab incubator:

The lab incubator is primarily made from three different types of materials. These materials are the basic stainless steel, sheet metal and carbon steel which will have thickness levels of about 0.5 and 1 cm. These materials are also used to create items like nuts, fans, motors and also screws, bolts. You will also have electronic materials which may have either analogue systems or digital ones along with microprocessors which would be able to provide temperature control to give internal lighting. The Shel Lab Incubators also have variable volume inside their chambers. There are countertop models which have ranges from 1.5 and 3 units of volume. There are a few models which have higher ranges of 5 to 10 units also.

Maintaining the Lab Incubator

The lab incubators are quite useful to identify different types of bacterial infections on the human body. Body fluid samples can be kept inside the lab incubator in a sterile environment and doctors can study pathogenic growth on them. Lab incubators are also used for inducing cell growth by nitrogen exposure. The controlled setting will help in allowing different microorganisms to survive and also multiply which allows the clinicians to study different forms of bacterial growth. This is why you will have to properly maintain your Laboratory Incubators. You should follow the methods mentioned below to safely maintain your lab incubator:

·         Sterility: You should always ensure that you have a sterile environment inside the incubator chamber. This is why you must always see to it that there are no chemical spills or contamination inside the incubator chamber. IF you spill any biological sample inside the chamber then you should take proper steps to immediately clean it off. You should also check and see that your incubator is not exposed to moisture because moisture can affect the growth of microorganisms. So, you must ensure that your incubator has a sterile environment both inside and outside the chamber.

·         Clean up: Ensure that lab workers clean the incubator after every session, they must see to it that there no biological samples left inside. You must also have weekly or at least monthly dusting of the incubator, dismantle the entire device and clean every component thoroughly. This will ensure that dust particles do not settle inside the incubator.

·         Customer care: You should always contain customer care for resolving problems and not try to mend anything by yourself.

·         Power supply: Check that your power supply does not have voltage fluctuations.

·         Nearby equipments: Do not have any device which gives off radiation nearby the incubator.

·         Optimum use: Do not overuse your machine more than its optimum time.

Tips for Choosing a Cleanroom Furniture

Purchasing cleanroom furniture would be essential to ensure the productivity of your lab. Without the proper cleanroom furniture, you will reduce the productivity of your lab which will reduce the efficiency of your lab. This is why you must see to it that you are making a sound investment when you buy cleanroom furniture. It is important that you check several features of your cleanroom furniture before making the purchase. In this small article, you will learn about some effective tips to help you choose cleanroom furniture.

What are your requirements?

The first thing which you should check is what are the specific furniture which you will be needing because cleanroom furniture comprises several things. You should focus on the space that you have in your laboratory so that you can make the most out of the space available. This will help you understand the number of furniture you require. For instance, you will have to have a fair idea about the number of tables and chairs that you need. It will not make sense to buy more furniture that you need because it will cramp up your space. You cannot also risk buying lesser number of furniture because this will mean that some lab workers will not be getting any seats and hence, their work will suffer. Thus you must have a proper layout of the cleanroom area that is available and then divide it precisely in accordance with your needs. This will ensure the productivity of your lab.

What type of furniture you may need?

Cleanroom furniture primarily refers to tables and chairs. So you will have to decide on the types of tables and chairs which you need. For instance, the heights and lengths of the tables should be specified clearly to your supplier. You should also specify the material you want your furniture to be of. This will help you make a better choice in terms of buying cleanroom furniture.

Who is your supplier?

Choose a supplier who will offer you with a range of choices in terms of the models that you have to choose from. Cleanroom Equipment are built along different specifications which are designed to suit specific requirements. Thus, you should buy furniture which will meet your requirement. You must also see to it that your supplier is reputed and well-established in his industry. This will let you buy quality equipment. You should also check the products offered by different suppliers so that you can make an informed decision regarding your supplier.

Online or offline

It is always recommended that you make your purchase from online suppliers, because online suppliers will offer you a better range of products at highly discounted prices. In addition to this, you will also have the lab products delivered to your home. These features will help in easing your experience of purchasing cleanroom furniture.

Basically, purchasing lab equipment and cleanroom furniture entails making a lot of choices and doing a lot of research. You will have to specifically see the things that you want and buy accordingly.

Things to Consider When Purchasing Gowning Room Furniture

It may seem incredibly difficult and an overwhelming task to purchase gowning room furniture. You would need to select high grade furniture which would vital components inside your lab. There are several companies which sell gowning room furniture. However, there are several thing which you have to consider before buying gowning room furniture. In this small article, you will be learning about certain essential things which you have to check before you buy gowning room furniture.

·         Finding a good supplier: Things to Consider When Purchasing Gowning Room Furniture:

You would have to find a good and reliable supplier. Reputation of your supplier is essential. Your supplier will have to understand your specific demands and make suggestions based on that. You would find a number of companies which provide gowning room furniture. However, you should discuss all your requirements and even customisation needs if necessary. They would have to send you some quotations regarding the estimates after that and only then, must you purchase your furniture. You should also check online reviews and customer feedback left by former customers before you make your purchase.

·         What are your requirements:

Before you buy your furniture, you should check the specific purposes in your lab and what type of projects you will be handling. You should check the various functions which would be performed in your lab and depending upon that you must order your furniture.

·         Product guarantees:

You should check with your supplier if the manufacturers offer complete guarantee on their gowning room furniture that ensures your furniture to be long lasting and would not break easily.

·         Safety controls:

Remember to check if the furniture you purchase have the necessary safety certifications or not. Lab furniture always have mandatory safety requirement and follow safety norms so your furniture must also follow these norms.

·         Future adaptability:

Your gowning room furniture should be upgradable and must have adaptability for future innovations. This will ensure that the furniture do not become obsolete easily and can last for several years.

·         Lab benches:

Lab benches are essential aspects of all laboratories. So when you want to have a properly functioning lab then you should get some top quality lab benches. These benches are essential in ensuring the functionality of your lab.

·         Lab stools:

Lab stools are vital components also. It will not matter, how big or small your lab is but you would always need to use top grade stools because it will enhance your lab’s functionality and let the lab technicians take breaks when they feel like it.

·         Ventilation:

You should remember to check that the furniture are portable and do not cramp space inside the lab. There should be provisions for proper ventilation.

·         Pricing:

Get cost effective Laboratory Equipment in bulk or packaged deals and take discounts when you buy from online suppliers.

Basically, these are some of the crucial aspects which you need to pay attention to when you want to buy gowning room furniture. Hopefully, you will get great lab equipment by following the advice mentioned in this article.

Installing laboratory refrigerators and freezers

Laboratory refrigerators and laboratory freezers are quite expensive and you need to make a big investment to procure them. People who use lab refrigerators or lab freezers need to be familiar with how they must put them in operation, and make sure that they are operated in accordance with the manufacturers’ instructions. They should also have a basic idea about the maintenance procedures.

Installation

There are instructions in the manual which come with lab freezers which will guide you to unbox and set the freezer up. You must position your equipment in a way that there is enough circulation for air towards the top and the sides. You must also ensure that the freezer is elevated at least four inches from the ground. Provide a strong and reliable power supply.

·         You must note that the lab freezers and refrigerators should be directly wired with the lab’s central electrical grid. You should do this with the help of professional electricians.

·         You should be familiar with your auto defrosting cycle in your lab freezer and how you can manually defrost it without having any impact on the contents.

General Maintenance Methods

It is essential that you keep the freezer units clean. You should clean the freezer parts on a regular or frequent basis. You can use warm water with baking soda for cleaning the interior surfaces and to remove bad odor from the spilled contents. You can clean the exteriors with any commercial glass cleaner.

Trouble-Shooting Lab Freezers

In general lab freezers have a two year warranty on the various parts and a five year warranty on the compressors. There may be occasions where the different units will not function properly and you must consult the manual in these cases. Some of the malfunctions which can happen are as follows:

·         The compressor is not starting: The power supply is disconnected or damaged.

·         The compressor is working continually: The refrigerant may need replacing, the evaporator has iced or is stuck.

·         The compressor has short cycles: You should check the overload protectors, increase the spread between the different temperature settings, check if the refrigerant is undercharged and the air in your system is not circulating properly.

·         The laboratory refrigerator freezer space is too warm: Settings are too high, the refrigerant may be overcharged, there may be a dirty condenser, the evaporator coils have iced, and the air flow to the condenser and evaporator is blocked.

·         The standard temperature is freezing the product: Control settings are too low or the control points are stuck.

·         Any form of noise: Noise can come because of various reasons like the fan blade is striking one the shroud, the tubes are rattling, the fan blade is vibrating, the condenser motor is rattling, vibrations in general and fan motors getting worn out.

It is important that you provide proper care to all your lab equipment and maintain them appropriately. Lab freezers and refrigerators will provide you with years of uninterrupted services when they are well maintained. In case, you face any issues, or your freezers need repair work then you must contact the professionals to come and resolve the issue.

How can Reducing the Risk of Liability in the science lab equipment

In a reach laboratory there are several regular advanced applications performed with expensive samples. These experiments help to create new drugs, medicines, cures and so on which are useful in analysis, chemistry, haematology, microbiology, genetics, urinalys, immunology and so on. It is important that you have the best quality science lab equipment so that you can have these experiments performed correctly. You should always choose god lab equipment suppliers who will offer you quality products which will meet the requirements of different labs and reduce the risks of liability.

You should, therefore, choose a lab supplier who will offer you:

A good supplier who has vast experience will offer you with the best equipment at inexpensive rates. Hence, you must try to find a lab equipment store which has an inventory with top quality products from reputed manufacturers.

Branded products – 

A good supplier will offer you equipment from various leading brands in your industry. You will get quality equipment which will incorporate innovative features that can ensure precise results in a short period of time. Reputable lab equipment stores will update their inventory on a regular basis by adding the newest products.

Easy to purchase – 

The online stores which sell laboratory devices will offer you ease in purchasing. You would be able to view various different models and equipment, this will include their specifications, prices, and you can choose those products which will serve your best.

Massive inventory – 

A reputed dealer will have a massive inventory with different types of laboratory equipment reagent, and controls. Thereby, they will save you plenty of time and also money because you will be able to purchase the things that you need from a single place.

Competitive price – 

Perhaps the best advantage that you will have in partnering with a good lab equipment supplier is that you will be getting top quality lab devices at really inexpensive prices. A lot of products will be offered at prices which are considerably less than the regular market prices.

Efficient customer service and full technical support - 

A good dealer will always offer you with proper customer care service after making the sale. This is important as it will ensure an efficient and an uninterrupted lab operation. Your dealer will have all professionally trained technicians who would handle the maintenance and repair work and can ensure that the devices are in good condition.

On-time deliveries – 

An equipment supplier who is reliable will have all the right shipping arrangements made so that he can ensure that he can send you your purchased products safely and within the time that was specified.

In the event that you have some restrictions in your budget, then you must find a lab supplier who will offer you with authentic second-hand lab equipment. You will also be able to get recertified equipment which is properly refurbished to meet the original standards. These equipment cost a lot less and will offer you an extended warranty along with full customer service and maintenance.

Key Considerations when Buying a laboratory refrigerators and freezers

In the event that you wish to buy laboratory equipment, then it is crucial that you do a lot of research on the products which you want to get first. Laboratory equipment are expensive and sensitive items, they are generally used in industries, medical labs, research and development centres and pharmacies. So, before you invest you should do get a thorough idea about the qualities you need to look for in your equipment. This is more so for lab freezers or refrigerators. Laboratory Refrigerators are used to store and preserve important samples and products, and if they get contaminated then the whole scientific experiment will be ruined. In this article, you will learn about some of the essential considerations you should make before buying a lab freezer. 

Go For Branded Products

It is important that you should buy from reputed, well established brands when you want lab freezers. The reason for this is that the products would be of good quality, you will get a set guarantee, you will be able to avail of customer care facilities and you may get servicing and repair works easily done too. Hence, it is always recommended that you buy from reputed brands.

What are the Qualities of a Good Lab Freezer?

Because of the fact that a lab fridge is used for medical testing, research and development and pharmaceutical industries, hence they require more refrigeration than what is needed in ordinary households. As a result of this, these lab freezers are more heavy-duty. They can maintain sub-zero temperatures for extended periods of time and can preserve crucial samples for months on end. Some of the features you should look for when buying a lab freeze are as follows:

·      ·          Is there a proper LED display indicating all important information like temperature set up, pressure build ups and so on.

·         If there is an integrated automated alarm system which has both visual and also audio notification settings

·         If the freezer is capable of alarming contacts in case of any emergency and if you have access ports to facilitate auxiliary monitoring.

·         A standard door locking system. Security is essential as it will help protect any important item stored inside the freezer from all unauthorised access.

·         There has to be a system for forced air circulation which can offer you better temperature control along with more uniform temperature.

·         In addition to these, you should check the energy ratings of your system and how energy efficient it is.

·         Lastly, you should check the volume capacity inside the freezer. You need to keep in mind that you will be storing several important items like blood samples, chemicals, vaccines, and so on inside the freezer. So there should be enough space for all of these items.

You can find a number of reputed brands which make lab freezers on the internet. Or you can visit your local supplier and check out what he has there. Online suppliers will offer you better deals and cheaper wholesale prices.

Installing laboratory ice maker machine

The ice machine is one of the most important equipment in a laboratory. It is used primarily for preserving important samples and controlling temperatures during experiments. Laboratory ice maker machines should be installed by professionals otherwise a faulty installation procedure can cause the machine to malfunction. In this small article, you will learn about how the ice machines need to be installed in order to work properly.

How Does the Ice Machine Work?

The ice machine functions in the following ways:

·         Cold water is stored inside the tank which has a pump that helps in circulation through evaporator plates and grid points.

·         Once the run through the compressor suction is done then the liquefaction process will be done.

·         Again the temperature is lowered to under minus ten degrees when the evaporated chilled water condenses on the evaporation plates and turns into ice gradually. The condensed ice will be of a specific thickness.

·         The procedure of defrosting is also available which can help with the de-icing. Thus, the process can be repeated again and again.

Ice Making Repetitions:

Water will automatically start to enter the storage tanks through the additional water valves. After that it, it will go into the flow control valves from where it goes into the pump heads and finally, the shunt. Inside the shunt, the water gets sprayed on the special ice surfaces where water gets cooled to its freezing point. The frozen water will not evaporate but will go into tank through the porous walls and thus the process continues to repeat itself again.

Ice Defrost Cycle:

After the ice reaches a certain predetermined thickness then hot gas will be discharged from a compressor. The gas is directed to the ice maker with a low temperature refrigerant for liquids. Lubrication processes help the gas to facilitate the evaporation process on the ice surface which results in gradual defrosting of the ice. The water which is generated through defrosting gets added back to the water reservoir through porous walls. Such a design also prevents the ice maker machine from getting wet when ice is being discharged.

Condensation:

Inside the laboratory ice machine, there will be mechanisms to facilitate the condensation process also. You will have both options: either water-cooled condensation or by evaporative condensers. For evaporative condensation, there is a evaporative plate which is placed inside the ice machine while for water-cooled condensation, the condenser is placed at the bottom or inside the refrigeration system. Evaporative condensation is quite useful for implementation in high air temperatures and it is also more energy efficient. But water-condensation is useful when you need to lower temperatures in the experiment set-up.

Installing the Ice Maker:

·         Go through the manual thoroughly and learn about all the different parts which need to be joined together.

·         Do not plug in the main switch before installation is complete.

It is highly recommended that you hire a professional to come and install your ice maker machine because this is a complicated job. Several suppliers offer free installation also and you should consider taking their help.